Using Acrylic Paints on Clothing: The Best Fabric Medium.

I’ve seen so many cute baby and maternity shirts online, but at $15 (on the low end) for something a baby will grow out of so quickly seems like too much for me. But there is some hope for cute onsies! I’ve seen that you can use the Cricut, freezer paper, and paint to create clothes yourself. I’ve never heard of using freezer paper before, and I know paint makes clothes stiff, so I tested out it all out on an old t-shirt before trying it out on baby clothes.

You might think that fabric paint is a paint option I’d consider, but it is a little pricey (I’m cheap), and there aren’t nearly as many colors available in fabric paint than acrylic (I love color). Now I know from unfortunate personal experience that acrylic paint will permanently color clothes, but it will make your clothes hard, stiff, and scratchy. So did some research and found that you can add fabric medium to paints so avoid the problem. There are tons of different kinds you can find online, but I decided to go with the 3 I found at Jo-Ann’s so I could use coupons (and not pay shipping).

IMG_5128

I found 2oz fabric medium from Folk Art ($2.99), Americana ($2.49), and Delta ($2.49). All three had the same instructions: mix one part medium to two parts paint. I made sure to use the same brand of paints for consistency. Using Apple Barrel paints and a plastic spoon for measuring, I made a mixture of each medium in a different color.

IMG_5145

Folk Art: Green

IMG_5133

Americana: Pink

IMG_5139

Delta: Orange

IMG_5142

I put newspaper inside the shirt so the colors wouldn’t bleed through, but you could use cardboard too.

IMG_5148

I first just free painted a few squares onto the shirt.

IMG_5151

I tried out freezer paper to see how it’d work. I didn’t use my Cricut to make the stencil for this practice run; I just cut a few diamonds onto the paper.

IMG_5152

Iron the paper shiny side down onto the shirt.

IMG_5153

It worked!

IMG_5155

Paint over the stencil, then peel it away after a few minutes.

IMG_5159

The paint doesn’t have to be dry, just not soaking wet.

IMG_5163

 

Now the hardest part of anything you make is waiting.

Let the paint dry for 24 hours.

After 24 hours, heat set  the paint. In order to do this, I put the shirt in the dryer for an hour. You can also do this faster with an iron, but the dryer is easier and you don’t have to worry about the paint bleeding.

I wore the shirt after this, and there was a definite winner, but just to be certain I washed the shirt inside out on the delicate cycle, and I was sure to use fabric softener. This softened all the paints considerably.

IMG_5166

So what’s the verdict? All three paints are wearable, but for a baby onsie I wanted the paint to feel like it wasn’t even there. The Folk Art medium has, by far, the best texture of the three. You really can’t feel the difference between the actual shirt and the painted area. I think for 50¢ more this is the best bet, especially for baby clothes.

Folk Art

The Americana Medium worked really well too. The painted area was not scratchy or tough, but you can distinguish where the painted area is on your skin. A lot of store bought shirts feel this way, and it’s not uncomfortable at all. The Americana brand is also cheaper than Folk Art, so if you don’t mind the texture or  are wearing an undershirt, this is a good choice also.

Americana

I did not like the Delta Medium at all. The painted area was a much more stiff and scratchy on your skin. However I was reading reviews for this online, and many people used this medium for outdoor furniture. I could see using this for the cushions or pillows of a patio set, as outside textiles need to be a bit tougher to hold up to the weather. This brand also is  often sold in big bottles rather than the 2 oz bottles, so you could use it for larger area projects. So for clothing, this is a definite no, but for outside things, I might use it.

Delta

My first baby onsie project isn’t perfect, but oh I love it, especially the back (doo-doo)!

img_20160516_123607.jpg

Besides my Daisy, I know 5 other babies being born this year! I’ll be making lots of custom onsies now, like this one:

imag1049.jpg

 

My New Favorite Kitchen Gadget: Pineapple Corer and Slicer

We have a small red hutch in our kitchen that houses what Matt likes to call UKGs, or Unnecessary Kitchen Gadgets.
Some gadgets he just doesn’t understand, like what a baster is.

image

Or why we need a happy face pizza cutter when we already have a regular one (because the kids like it, and sometimes I use a pizza cutter to cut dough and the regular one is in the dishwasher 😜)

image

Other gadgets I can’t deny have little use. I don’t really eat grapefruit, so a grapefruit spoon isn’t necessary (let alone 4). But then again one who knows. I might use them to scoop out citrus fruits for a salad or dessert or something.

image

But for real I found an extremely necessary gadget this time. It is a pineapple corer and slicer. It does exactly that, cores and slices pineapple.

image

So easy!

OK, so in all honesty I could take or leave pineapple. But you know I’ll be eating a lit more if it with this! My first time using it I accidentally went all the way through the pineapple, making a hole in the bottom.

image

It wasn’t really a problem, but this summer I’ll need to avoid doing that. I see myself filling the cored pineapple with some frozen drinks (virgin drinks for me for this summer).

I saw this at Bed Bath and Beyond for $20, but then I checked online and Amazon Prime had this one for $6.99! I obviously went for the $6.99 version.

image

I’ve gadgets and gizmos a plenty, and I love them all, necessary or not. I don’t know why, I just do. If you have a favorite gadget, let me know about it!

image

Glittered Wine Glasses for President’s Day Weekend

After a break of a few years, we finally resumed our annual President’s Day weekend family reunion ski trip (or, for many of us, sit in a cabin in the mountains and hang our trip). My sisters, parents and cousins rent two side by side houses so we can bounce back and forth from the houses.

IMG_4538

I used to go snowboarding with my husband several times a winter, but I haven’t been able to since I hurt my knee. I’m so glad that this year all my gear was finally put to use; Matt took my niece Jenna out to try boarding. She had a great time with her dad and uncle on the mountain.

12710708_1201307933231033_8126977139350135232_o

To celebrate the re-start of our festivities, I made some pretty wine glasses for all the ladies in the trip.

image

The glasses are pretty easy to make, and as with anything with glue, the hardest part is the waiting between layers. I used the Cricut machine to cut out everyone’s initial and name in vinyl lettering for the wine glasses. I also glittered the stems of the glasses. If you don’t have a Cricut, you can still make glasses with glittered stems. We had a great time, and the glasses were a hit!

IMG_4553

 

For the monogram glasses:

  • I wanted contrasting fonts for the monogram letter and the full names, so I went with a full, swirly monogram and a thin, hand written font for the names.
  • I applied the whole name on the glass in gold vinyl in MV Boli (a system font already on my computer).
  • image

  • I applied the first initial on the opposite side in purple vinyl (to match the glittered stems) in a monogram font I found on dafont.com called Monogram kksc . You can download the same font here. 

 

 

image

For glittered stems:

Note – you want all of your coats of glue, glitter, and sealer to be thin. If your layers are too thick, they will eventually crack

  • First, wash and dry your glasses and use rubbing alcohol on the surface of where you are going to apply the glitter.
  • Apply a thin coat of Mod Podge to the stem and base of the glass.
  • Sprinkle on superfine glitter.

Purple Glitter Stems 1

  • Allow to dry for several hours or overnight. You will know the glue is dried by looking at the underside of the glass. If you see any white, the glue is still wet.
    Purple Glitter Stems 2
  • Apply another thin coat of Mod Podge and reglitter.
  • Allow to dry again.
  • If you need to, repeat the glue and glitter layers until your desired coverage. I only needed two coats of glitter, but you shouldn’t need more than 3 or 4.
  • When your last layer is dried, apply a very thin coat of Dishwasher safe Mod Podge*** and allow to dry. If you think you need to, you can apply a second coat after the first has dried.

Purple Glitter Stems 3

 

***Many people seal their glitter glasses with Triple Thick. I tried it with my glass, but it reacted with the dark purple glitter I used. I wasn’t sure if I did something wrong, so I asked about it on a crafting group page. Apparently certain glitter brands/colors will muddy and react the way mine did. I really like the feel of the triple thick sealer (it feels more like glass) so I will try to use it with another brand/color of glitter in the future and post if there’s a difference.

TT vs MP

DIY Necklace: Wearing the Beach all Year

Beach Necklaces

I grew up here, ten minutes from the beach. I can’t imagine having to plan on going to the beach. It’s something I do so casually that I still forget what a special place it is. I usually go to the beach during the week, after work, and alone. We love Island Beach State Park. If you drive past their first two bathing beaches, there is some amazing scenery. I don’t think people realize there is so much beauty right in NJ. Pictures of the walk to the ocean rival some you can find on a tropical island. I love the walk to the ocean. As you walk through the trees and sand, at first all you hear are birds. Then the smell of the ocean comes and you start to hear the sound of waves, and finally you get to the view. When I head to the beach most people are leaving it, so it’s like my own private oasis. I always keep a blanket or chair in my trunk, and if I know Matt will be late coming home from work I just head to the beach and read for an hour or two.

Walk to the Beach

But I didn’t really get to do that this summer. I was afraid of going to the beach alone. I’ve never had fainting spells or anything, but I didn’t want to risk overheating by myself while pregnant. I only went to the beach a few times, and I did have to plan around it. It made me appreciate my proximity more. I don’t think I’ll ever want to live far enough away where I have to plan a beach trip. I know that with a baby I’ll have to be more structured with my beach time next year, but I’m glad that if I ever am bored and we have nothing to do we can always walk to beach to pass the time.

Beach

September is a great time to go to the beach. There aren’t many people and the water is super warm. Matt and I went recently for no reason other than we were bored.  We collected seashells, put our feet in the water, and watched as the tiny clams and sand crabs burrowed into the sand. It made me sad that summer is pretty much over. I can still walk the beach in the fall and winter, but it’s not really the same.

SeaShells

So I’m going to wear the beach all year long. I made these simple beach bottle necklaces to keep the sand close to my heart. I found a set of tiny bottles at Michael’s. Attach the ring to the cork (You might have t trim the metal with some wire cutters. put some sand in the bottle. It’s easier to scoop the sand rather than pour it. Then I used needle nose tweezers to put in a tiny sea shell, apiece of sea glass, and a piece of faux moss (to look like seaweed). Use some leather cord as the necklace, and you viola!

beach necklace

I made a second charm as a message in  a bottle. With less sand, I added some small shells, and I wrote a note on a piece of scrap paper (I ripped the paper so the edges weren’t so straight). I realize I could have just scribbled or not have written anything at all, but I like an ocean quote for my ocean necklace. I know it’s there, after all.  My message is from Van Morrison’s “Into the Mystic.” I rolled up the scrap and put it in my bottle. How sweet!

message in a bottle

If you don’t live near the beach, you could make your necklace with sand and shells from your favorite vacation destination and keep it close to your heart too.

Last Minute Gift: Lottery Ticket Tree

Lottery Ticket Tree

 I wrapped all my gifts this weekend with the help of my friends Sara and Meg. We painted, stamped, and ribboned the massive amounts of brown paper I have for some really pretty wrapping paper.

The last person on my list was Dad. Nothing like waiting for the last minute! My Dad insisted he didn’t need or want anything for Christmas. I wasn’t totally stumped, though. He LOVES his scratch off, so I knew they’d be a perfect gift for him. I didn’t want to just stuff the gifts in a bag with some tissue paper when I wrapped everyone else’s so so beautifully. I picked up a foam cone and some sewing pins from Micheal’s and made a ticket tree!

All you need for a lottery ticket tree

This was super easy. Just wrap the tops of the tickets around the cone and pin the corners down. Overlap and flare out all the tickets to add texture until you get to the top of the tree.

How to make a lottery ticket tree

I topped the tree off with a bow, and I also pinned on a moose ornament (my Dad’s nickname is Moose). Simple, quick, and cute!

Lottery Ticket Tree

Asterisk Gifts

(609) 549 22 38